Canon PIXMA MP810 Servis Kılavuzu - Sayfa 17

Hepsi Bir Arada Yazıcı Canon PIXMA MP810 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Canon PIXMA MP810 20 sayfaları. Personal printing guide
Ayrıca Canon PIXMA MP810 için: Kullanıcı Kılavuzu (2 sayfalar), Hızlı Başlangıç (1 sayfalar), Tamamlayıcı Kılavuz (6 sayfalar), Hızlı Başlangıç Kılavuzu (38 sayfalar)

*1: General notes:

- Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly.

See

3-2. Special Notes on Repair Servicing

- Do not drop the ferrite core, which may cause damage.

- Protect electrical parts from damage due to static electricity.

- Before removing a unit, after removing the power cord, allow the machine to sit for approx. 1 minute (for capacitor discharging to protect

the logic board ass'y from damages).

- Do not touch the timing slit strip film, timing slit disk film, and timing slit disk eject film. No grease or abrasion is allowed.

- Protect the units from soiled with ink.

- Protect the housing from scratches.

- For the MP810 automatic print head alignment, use Matte Photo Paper (MP-101) to ensure alignment accuracy.

- Exercise caution with the screws, as follows:

i. The screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit (DO NOT loosen them in other

cases).

ii. DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning (they are not adjustable in

servicing)

or the Parts Catalog for details.

1-12