Canon PIXMA MP810 Servis Kılavuzu - Sayfa 15

Hepsi Bir Arada Yazıcı Canon PIXMA MP810 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Canon PIXMA MP810 20 sayfaları. Personal printing guide
Ayrıca Canon PIXMA MP810 için: Kullanıcı Kılavuzu (2 sayfalar), Hızlı Başlangıç (1 sayfalar), Tamamlayıcı Kılavuz (6 sayfalar), Hızlı Başlangıç Kılavuzu (38 sayfalar)

Canon PIXMA MP810 Servis Kılavuzu
Printing is incorrect.
No ejection of black ink.
Graphic or text is enlarged on printouts.
Faulty scanning
No scanning.
Streaks or smears on the scanned image.
Streaks or smears on the image scanned from film,
or no scanning of film.
*1: Replace the print head only after the print head deep cleaning is performed 2 times, and when the problem persists.
<Part 1: 2. LIST OF ERROR DISPLAY / INDICATION>
1-10
*1
- print head
.
- Perform print head alignment.
Replace the logic board.
- Confirm that the ink tanks are installed properly.
- Perform print head maintenance.
- Replace the
- ink tank, or
*1
- print head
.
- Remove foreign material from the purge unit caps, if any.
- Replace the purge unit.
When enlarged in the carriage movement direction:
- Clean grease or oil off the timing slit strip film.
- Replace the
- timing slit strip film,
- carriage unit, or
- logic board.
When enlarged in the paper feed direction:
- Clean grease or oil off the timing slit disk film or the timing slit disk eject
film.
- Replace the
- timing slit disk film,
- timing slit disk eject film,
- timing sensor unit,
- LF roller,
- platen unit, or
- logic board.
- Confirm the connection between the scanning unit and the logic board.
- Replace the
- scanning unit, or
- logic board.
- Clean the platen glass.
- Confirm the connection between the scanning unit and the logic board.
- Replace the
- scanning unit,
- logic board, or
- document pressure plate sheet.
- Clean the platen glass.
- Confirm the connection between the scanning unit and the logic board.
- Replace the
- scanning unit,
- logic board,
- FAU and mount film adapter, or
- document pressure plate unit.
- Clean the FAU lamp.