Canon PIXMA MX340 Series 간소화된 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Canon PIXMA MX340 Series에 대한 간소화된 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX340 Series 35 페이지. Cartridge reset
Canon PIXMA MX340 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (11 페이지), 네트워크 설정 매뉴얼 (26 페이지), 브로셔 (2 페이지), 매뉴얼 (8 페이지), 매뉴얼 (10 페이지), 네트워크 설정 문제 해결 (13 페이지), 네트워크 설치 매뉴얼 (16 페이지), 연결 매뉴얼 (11 페이지), 매뉴얼 (4 페이지)

페이지 인쇄
Canon PIXMA MX340 Series 간소화된 서비스 매뉴얼
Error
TX /
code
RX
##780 TX
After transmitting EOR-EOM in ECM transmission,
no significant signal has been received, and
re-transmission of the procedure signal has been
attempted the number of specified times but failed.
##782 TX
After transmitting EOR-EOM in ECM transmission,
DCN has been received.
##783 TX
After transmitting EOR-EOM in ECM transmission,
re-transmission of the procedure signal has been
attempted the number of specified times but failed,
or T5 time-over (60 sec.) has occurred.
##784 TX
After transmitting EOR-EOM in ECM transmission,
ERR has been received.
##785 TX
After transmitting EOR-EOP in ECM transmission,
no significant signal has been received, and
re-transmission of the procedure signal has been
attempted the number of specified times but failed.
##787 TX
After transmitting EOR-EOP in ECM transmission,
DCN has been received.
##788 TX
After transmitting EOR-EOP in ECM transmission,
re-transmission of the procedure signal has been
attempted the number of specified times but failed,
or T5 time-over (60 sec.) has occurred.
##789 TX
After transmitting EOR-EOP in ECM transmission,
ERR has been received.
##790 RX
After receiving EOR-EOP in ECM reception, ERR
has been transmitted.
##791 TX /
During the ECM mode procedure, a signal other
RX
than a significant one has been received.
##792 RX
In ECM reception, PPS-NULL between partial
pages has not been detected.
##793 RX
During high-speed signal reception in ECM, no
effective frame has been detected, and a time-over
has occurred.
Meaning
(11/37)
Solution
(parts that are likely to be faulty)
- Try a higher transmission level.
- Increase the transmission level of the
receiving machine.
- Increase the transmission level of the
receiving machine.
- Increase the period of time of the T5
time-over.
- Try a higher transmission level.
- Try a higher transmission level.
- Increase the transmission level of the
receiving machine.
- Try a higher transmission level.
- Increase the period of time of the T5
time-over.
- Try a higher transmission level.
- Increase the transmission level of the
sending machine.
- Increase the transmission level of the
sending machine.
- Try a higher transmission level.
- Increase the transmission level of the
sending machine.