Canon PIXMA MX850 네트워크 설정 매뉴얼 - 페이지 8

{카테고리_이름} Canon PIXMA MX850에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX850 43 페이지. Multifunction brochure
Canon PIXMA MX850에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 (2 페이지)

페이지 인쇄

2-1 Setting Up for Use over Wired LAN

Important

When the machine has not been connected to the network, to set up the machine to be used from a LAN-

connected computer, the necessary software must be installed on the computer. See "1 Preparing for

Setup" on page 2 and "2 Installing the Software" on page 3 to confirm that the software installation is

complete, then proceed with the procedure below.

On the Setup Method screen, select Set up

the printer and the computer for network

use, then click Next.

Note

If you select Use the printer via USB, the machine is

set up to be used with USB connection.

When the Printer Connection screen

appears, connect the machine to the

computer with a USB cable, then turn on the

machine.

When you turn on the machine, the COPY button

flashes green, then remains lit.

When the computer detects the machine, the next

screen will appear automatically.

Note

To set up the machine that is not yet connected to a

wired LAN, connect the machine and the computer

with a USB cable.

If you cannot go to the next procedure after three

minutes, see "Cannot Install the MP Drivers" on

page 31.

When the Setup Preparations dialog box

appears, confirm that preparation is

complete, then click Next.

Note

If the machine's network settings are already

configured, the Setup Environment Confirmation

dialog box appears asking for your confirmation to use

the machine with the current settings. You can

proceed with the setup using the current network

settings. To do so, click Use it as is. To reconfigure the

network settings, click Reconfigure.

Setting Up the Machine and the Computer (Windows)

(continued from step 9 on page 5)