Canon PIXMA MX850 네트워크 설정 매뉴얼 - 페이지 5
{카테고리_이름} Canon PIXMA MX850에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX850 43 페이지. Multifunction brochure
Canon PIXMA MX850에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 (2 페이지)
페이지 인쇄
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
2 Installing the Software
Note
If the Found New Hardware or Found New Hardware
Wizard screen appears automatically during the installation
process, remove the USB cable connected to your computer.
Click Cancel to quit the screen. In Windows Vista, the screen
may close automatically when the USB cable is unplugged.
Then turn off the machine and proceed from step 3 to install
the software.
1
Turn off the machine.
Note
Confirm that all the lamps on the Operation Panel
have gone out.
2
Turn the computer on and start Windows.
3
Insert the Setup CD-ROM.
The setup program should run automatically.
If the setup program does not run automatically,
see "Installation does not start automatically when
the Setup CD-ROM is inserted into your computer's
disc drive." in "Cannot Install the MP Drivers" on
page 31.
In Windows Vista, go to step 4.
In Windows XP and Windows 2000, go to step 6.
Important
If two CD-ROMs are included in the package for the
Windows setup, insert the Setup CD-ROM "Windows
(CD-1)".
Note
If the Select Language screen appears, select a
language, then click Next.
If the Select Your Place of Residence screen
appears, select your place of residence, then click
Next.
Setting Up the Machine and the Computer (Windows)
3