Canon PIXMA MX850 Handleiding voor netwerkinstellingen - Pagina 5
Blader online of download pdf Handleiding voor netwerkinstellingen voor {categorie_naam} Canon PIXMA MX850. Canon PIXMA MX850 43 pagina's. Multifunction brochure
Ook voor Canon PIXMA MX850: Aanvullende handleiding (6 pagina's), Installatie-instructies (2 pagina's), Brochure (2 pagina's)
Pagina afdrukken
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
2 Installing the Software
Note
If the Found New Hardware or Found New Hardware
Wizard screen appears automatically during the installation
process, remove the USB cable connected to your computer.
Click Cancel to quit the screen. In Windows Vista, the screen
may close automatically when the USB cable is unplugged.
Then turn off the machine and proceed from step 3 to install
the software.
1
Turn off the machine.
Note
Confirm that all the lamps on the Operation Panel
have gone out.
2
Turn the computer on and start Windows.
3
Insert the Setup CD-ROM.
The setup program should run automatically.
If the setup program does not run automatically,
see "Installation does not start automatically when
the Setup CD-ROM is inserted into your computer's
disc drive." in "Cannot Install the MP Drivers" on
page 31.
In Windows Vista, go to step 4.
In Windows XP and Windows 2000, go to step 6.
Important
If two CD-ROMs are included in the package for the
Windows setup, insert the Setup CD-ROM "Windows
(CD-1)".
Note
If the Select Language screen appears, select a
language, then click Next.
If the Select Your Place of Residence screen
appears, select your place of residence, then click
Next.
Setting Up the Machine and the Computer (Windows)
3