Astralpool QB600 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Astralpool QB600에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool QB600 16 페이지.

Figure 19. Remove the Filter Canister

Separate the two filter canisters.

Figure 20. Separate Filter Canisters

Empty all debris from the filter canisters, then rinse

canisters, the filter support and the cleaner using a

hose.

Figure 21. Wash the Filter Canisters

QB robotic cleaner

NOTE: Periodically, remove the filter canister and clean

thoroughly with soapy water and a soft bristle

brush.

5.3

Store the Cleaner When Not in Use

The cleaner must be cleaned regularly using slightly

soapy clean water. Do not use solvents such as

trichlorethylene or its equivalent. Rinse the cleaner

generously using clean water. Do not let your cleaner

dry in direct sunlight near the pool. The cleaner should

be stored on its caddy so that it dries quickly.

Disconnect cleaner from the power source.

Starting at the cleaner head, remove all coils and

tangles from the cable. Lay the cable in the sun to

loosen any tangling memory.

Place the rear wheels on the caddy and position the

cleaner vertically on the caddy base.

Disconnect the cable from the control box. Replace

the protective cap on the control box.

Loosely coil the power cable starting at the cleaner

and moving toward the connection point at control

box. Store the cable by wrapping it around the hook

located on the front of the caddy.

Figure 22. Untangle the Floating cable

5.4

5.4.1

Replacing Brushes

The cleaner is fitted with PVC brushes with a ''wear''

indicator.

Owner's Manual