Astralpool QB600 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Astralpool QB600에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool QB600 16 페이지.

페이지 인쇄
Astralpool QB600 소유자 매뉴얼
QB robotic cleaner
Figure 23. Worn Brush Indicator
To maintain cleaner performance at its best you need
to replace the brushes as soon as one of the wear
indicators is reached (even if the blade wear is not
even). It is recommended that you replace the brushes
when the rubber is worn down to the top of the wear
indicator (or every two years, whichever comes first).
To replace a worn brush:
1.
Lift the cleaner to a vertical position so that the handle
is up.
Figure 24. Cleaner in Upright Position
2.
Separate the edges of the brush and undo the tabs.
Remove the worn brushes.
Figure 25. Undo the Tabs of the Brush
3.
To install the new brush, position the new brush on
the roller with the cleaning blades facing away from
the roller.
Owner's Manual
Raised groove
becomes partially
flattened, indicating
excessive wear
2
3
Figure 26. Install the New Brush
4.
Thread each tab into the slot provided and gently feed
it through until the heel comes out at the other side of
the slot.
4
Figure 27. Pull Tabs Through Each Slot
5.
Use a pair of scissors to cut the tabs 3/4 inch from
the heel so that they are no higher than the cleaning
blade.
6.
Repeat the procedure to install the second brush.
Figure 28. Cut Tabs
13