Astrapool Dual Pure 100 매뉴얼 - 페이지 5

{카테고리_이름} Astrapool Dual Pure 100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrapool Dual Pure 100 20 페이지. Salt electrolysis and ph regulation

PROBE:

Place the pH probe on the salt chlorinator chamber in the space provided.

Important: ensure that the probe is placed so that the two protective edges of the glass ball are

perpendicular to the flow.

Earth

Arrow in the

direction of

flow

FLOW SWITCH:

We advise the installation of the flow switch in the following cases

Filtration pump situated above the water level (risk of un-priming).

Chamber installed in a bypass configuration.

Installation: Install the flow switch in the place on the chamber designed for the purpose and

position the arrow above it in the direction of the water flow.

Operating principle: If the flow is interrupted accidentally or during a backwash and whenever the

water flow-rate is less than 2.9 m

Warning:

The flow switch provided contains its own system of recognition. If you need to replace it,

contact your specialised dealer.

If the flow switch is not plugged in, the device will work normally, regardless of the presence

of hydraulic flow. It is, therefore, absolutely necessary for the unit to be controlled by the

filtration pump in order to ensure that water is circulating when chlorine is being produced

and pH correctors injected.

FLOW

pH PROBE

Salt electrode

/h, the flow switch will cut chlorine production.

pH Injection

FLUX

Número de revisión

ENGLISH

FLOW

Rev 001-2013-08-06