Astrea Evolve AA20CRK 교체 매뉴얼 - 페이지 9

{카테고리_이름} Astrea Evolve AA20CRK에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrea Evolve AA20CRK 19 페이지. Wetted flow path for 200mm and 250mm chromatography columns

페이지 인쇄

10. Discard the adjuster bed support, flowcell and antijet.

Wetted Flowpath components Discarded

Flowtube adaptor

Flowtube seals x2

Flowtube

Adjuster mesh assembly

Adjuster Flowcell and antijet

Adjuster seal

Disassembly of the Fixed Assembly

1. Identify the components on the schematic shown in Figure 1.3.

2. Disconnect the pipework elbow from the bottom of the column.

3. Identify the fixed end support blocks that are located on the column support legs. Swing

these blocks so that they support the flowcell. These will support the flowcell when the

fixing bolts are removed. See Figure 1.3.

ADJUSTER ASSEMBLY

Figure 1.3 Fixed Assembly Evolve® 250 column

Non-wetted components RETAINED

Seal Actuation Nut

Spacer

Stainless steel Seal adjust tube

Threaded central height adjust rod

Height adjust handle assembly

Adjust Flange

Seal setting ring

Flowcell locking clip