Astrel Instruments AST-8300-A 자동 매뉴얼 - 페이지 5

{카테고리_이름} Astrel Instruments AST-8300-A에 대한 자동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrel Instruments AST-8300-A 14 페이지.
Astrel Instruments AST-8300-A에 대해서도 마찬가지입니다: 시작하기 (20 페이지), 사용자 설명서 (6 페이지)

페이지 인쇄

Astrel Instruments

AST-8300-A

Actuator setup

Open 'Setup' -> 'Driver setup' in the menu.

You should choose the device to work with from the 'device' dropdown list in the first place.

It is necessary to restart the program for the connection to the specified device to occur. If

all went right, the program would start without pulse driver error messages.

If the launch is successful, connect the device to the autoguider port and check that the

guiding device functions properly.

That's all that is needed for autoguiders with the ST-4 output connector, while the other

parameters are used for interfacing directly to the mount (send an email to info@astrel-

instruments.com for support)

Autoguider Manual

5/14

rev A