Astrel Instruments AST-8300-A Automanualr El Kitabı - Sayfa 5

Dijital Kamera Astrel Instruments AST-8300-A için çevrimiçi göz atın veya pdf Automanualr El Kitabı indirin. Astrel Instruments AST-8300-A 14 sayfaları.
Ayrıca Astrel Instruments AST-8300-A için: Başlarken (20 sayfalar), Kullanıcı Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Astrel Instruments

AST-8300-A

Actuator setup

Open 'Setup' -> 'Driver setup' in the menu.

You should choose the device to work with from the 'device' dropdown list in the first place.

It is necessary to restart the program for the connection to the specified device to occur. If

all went right, the program would start without pulse driver error messages.

If the launch is successful, connect the device to the autoguider port and check that the

guiding device functions properly.

That's all that is needed for autoguiders with the ST-4 output connector, while the other

parameters are used for interfacing directly to the mount (send an email to info@astrel-

instruments.com for support)

Autoguider Manual

5/14

rev A