Akw AKW23116 설치, 서비스 및 사용자 지침 - 페이지 12
{카테고리_이름} Akw AKW23116에 대한 설치, 서비스 및 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw AKW23116 16 페이지. Basin mixer valve
페이지 인쇄Problem Solving
Fault
Water temperature is
too hot or cold
Low flow
No flow
Water goes cold in use
Water is leaking from the
T301
Cannot turn T301 off
Diagnosis
No hot water is reaching the T301 -
check supply.
Inlet tails are reversed -
Check connections.
Filters are blocked -
Check filters
Conditions are outside of the specifications.
Isolation valve is closed - check valves.
Temperature set too high during
commissioning - check setting.
Airlock in the inlet pipework - check for
airlocks.
Water supply is not balanced - check
supply pressure is balanced.
Filters are blocked - check filters
Isolation valve is closed - check valves.
Conditions are outside of the specifictions.
Supply pressure too low -
check the supply is above 0.2 bar.
No hot water is reaching the T301 -
check supply.
Filters are blocked - Check filters
Isolation valve is closed - check valves.
No hot water is reaching the T301 - check
any boiler or water tank that is supplying
hot water.
Seals worn or damaged - request service
12