Flycam FLCM-FLN-MSTR-PLA 조립 설명서 - 페이지 3

{카테고리_이름} Flycam FLCM-FLN-MSTR-PLA에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Flycam FLCM-FLN-MSTR-PLA 5 페이지. Flowline master for camera & gimbals with placid stabilizing arm

페이지 인쇄

For Safety Belt



Attach one end of the safety belt with the

support jacket and make a knot with the

rest of the belt, as shown in the image. You

can attach this belt in many areas according

to your requirement.



Attach the other end to your camera for

more safety & protection.



Through the balance adjustment Knob, you

can adjust the balance anti-clockwise

according to the weight of your setup.

CAUTION: Do not release the lever without

removing the setup. It may result in severe

damage to the camera.

Detach the Placid from the Flowline Master



Get the spring off the camera hook with the

help of an Allen key.



Pull the camera hook cup through the cord

and remove the remaining cord from the

cup.



To remove the placid arm from its position,

unscrew one side of the safety elastic cord

from the plaid arm's knob. Then, pull the

other side of the elastic cord out from the

flowline support arm.