Flycam FLCM-FLN-MSTR-PLA 조립 설명서 - 페이지 2

{카테고리_이름} Flycam FLCM-FLN-MSTR-PLA에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Flycam FLCM-FLN-MSTR-PLA 5 페이지. Flowline master for camera & gimbals with placid stabilizing arm

페이지 인쇄

Flowline Master with Placid Setup



Remove placid from foam packing. The

placid arm has a cord attached to it. Join

section 1 of the support bar to section 2

with a simple push-fit technique, as shown

in the image.



When assembled, the flowline master will

look the same as shown in the image.



Insert the placid arm into the support bar

through the cord and secure it correctly

with the help of a knob.



To fix the placid arm at its appropriate

position, attach one side of the safety shock

cord to a knob on the placid arm. Then, drag

the other side of the elastic cord across the

flowline support arm, and attach it to the

knob on the other side of the placid arm.



Adjust & tighten the buckles provided at the

chest and the waist.



Loosen the knob of the camera hook and

attach the camera to it. Tighten the knob to

ensure a slip-free connection.