Flycam FLCM-FLN-MSTR-PLA Manual de montagem - Página 2
Procurar online ou descarregar pdf Manual de montagem para Acessórios para câmaras Flycam FLCM-FLN-MSTR-PLA. Flycam FLCM-FLN-MSTR-PLA 5 páginas. Flowline master for camera & gimbals with placid stabilizing arm
Imprimir página
Flowline Master with Placid Setup
Remove placid from foam packing. The
placid arm has a cord attached to it. Join
section 1 of the support bar to section 2
with a simple push-fit technique, as shown
in the image.
When assembled, the flowline master will
look the same as shown in the image.
Insert the placid arm into the support bar
through the cord and secure it correctly
with the help of a knob.
To fix the placid arm at its appropriate
position, attach one side of the safety shock
cord to a knob on the placid arm. Then, drag
the other side of the elastic cord across the
flowline support arm, and attach it to the
knob on the other side of the placid arm.
Adjust & tighten the buckles provided at the
chest and the waist.
Loosen the knob of the camera hook and
attach the camera to it. Tighten the knob to
ensure a slip-free connection.
2