Flycam HD-5000 조립 설명서 - 페이지 5

{카테고리_이름} Flycam HD-5000에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Flycam HD-5000 10 페이지. Video stabilizer
Flycam HD-5000에 대해서도 마찬가지입니다: 사용 설명서 (11 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

The many slots located on Head Plate (Part-1) and Bottom Plate (Part-1c) allows you to easily adjust X & Y

Axis for perfect balance. Place the assembly in line with center of stabilizer post and tighten the side ad-

justers, as shown. Further fine tuning will probably be required.



Image 14: Head Plate X adjustment



Image 15: Head Plate Y adjustment

NOTE: You can also mount your camera using Quick Release Plate.



Loosen allen bolt at bottom of Quick Re-

lease Adapter (Part-6) and attach it to Head

Plate.

NOTE: Always secure the screws and all parts

after any adjustments are made



Then attach Head Plate (Plate-1a) to camera

platform (Plate-1) with appropriate fore &

aft positioning and tighten all four side

knobs, as shown. Further fine tuning will

probably be required.



Open the lever and remove Quick Release

Plate from Adapter (Part-6). Then attach it

with your camera with the help of screw

driver. Insert your camera setup into the

Adapter and tighten the lever back.