Flycam HD-5000 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для фотоапаратів Flycam HD-5000. Flycam HD-5000 10 сторінок. Video stabilizer
Також для Flycam HD-5000: Інструкція з експлуатації (11 сторінок), Інструкція з експлуатації (16 сторінок)

Друкувати сторінку

The many slots located on Head Plate (Part-1) and Bottom Plate (Part-1c) allows you to easily adjust X & Y

Axis for perfect balance. Place the assembly in line with center of stabilizer post and tighten the side ad-

justers, as shown. Further fine tuning will probably be required.



Image 14: Head Plate X adjustment



Image 15: Head Plate Y adjustment

NOTE: You can also mount your camera using Quick Release Plate.



Loosen allen bolt at bottom of Quick Re-

lease Adapter (Part-6) and attach it to Head

Plate.

NOTE: Always secure the screws and all parts

after any adjustments are made



Then attach Head Plate (Plate-1a) to camera

platform (Plate-1) with appropriate fore &

aft positioning and tighten all four side

knobs, as shown. Further fine tuning will

probably be required.



Open the lever and remove Quick Release

Plate from Adapter (Part-6). Then attach it

with your camera with the help of screw

driver. Insert your camera setup into the

Adapter and tighten the lever back.