Doran DS8030 사용자 설명서 - 페이지 10

{카테고리_이름} Doran DS8030에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran DS8030 19 페이지. Wheelchair scale

Zero Operation

1. Place item to be zeroed on the scale platform.

2. Press ZERO. The scale will display a zero weight. If the item is removed, the

stable negative weight will be shown.

3. The patient and the item are then place on the scale platform. The patient's

weight, less the item's weight, will be displayed.

4. To reset the scale weight to zero, Press Zero again with the scale platform

empty.

NOTE: Stable weights between -5 lb and +5 lb will be zeroed out after 3 seconds.

1. With a hold weight displayed, press and hold the TARE button for 1.5 seconds

to enter the height value. Height entry starts at 5: 6.0 or 168.0, representing 5

foot 6 inches or 168 centimeters. NOTE: Height units can be changed by

pressing the Units button.

2. Press the ▲ button to increase or the ▼ button to decrease the value. When

the correct value is displayed, press the BMI button to enter value and exit.

NOTE: A menu timer will exit out of this entry mode if no buttons are pressed

within a 30 second time period.

1. With the patient standing on the scale platform, press Reweigh to reinitiate the

weighing process.

2. The display will scroll dashes for about 3-5 seconds until the patient's weight is

captured.

3. The indicator will beep (when enabled) and hold the weight on the display until

the scale shuts off automatically.