Doran DS8030 사용자 설명서 - 페이지 9

{카테고리_이름} Doran DS8030에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran DS8030 19 페이지. Wheelchair scale

Weighing a Patient without Tare

• Turn on the indicator by pressing the ZERO button.

• The indicator will perform a startup zero.

• The indicator will display scrolling dashes "-----". Then display 0.00 weight.

• Place the patient on the scale platform.

• The display will scroll dashes for about 3 seconds until the patient's weight is

captured.

• The indicator will beep (when enabled) and then hold the weight on the

display until the scale shuts off.

Example 1:

• Turn on scale.

• Scale zeroes.

• Press TARE.

• 15.0lb is displayed.

• Use the ▲ and ▼ arrows to set the tare value.

• Press TARE to apply the tare value and return to the weight display.

• Display now shows a negative value and the NET indicator is displayed.

Example 2:

• Turn on scale.

• Scale zeroes.

• Place patient and wheelchair on the scale.

• Display holds the weight.

• Press TARE.

• 15.0lb is displayed.

• Use the ▲ and ▼ buttons to set the tare value.

• Press TARE to apply the tare value and return to the held weight.

• The displayed weight now shows the NET patient weight. The tare value has

been applied to the held weight. Note that the scale operator does not need

to press REWEIGH for the tare to be applied to the held weight.

Once a TARE value has been applied it will remain in effect until changed or until the

scale shuts off.