Doran Scales DS100 운영자 매뉴얼 - 페이지 5
{카테고리_이름} Doran Scales DS100에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran Scales DS100 15 페이지. Scale indicator
페이지 인쇄Zero Weighing
1. Empty the scale base or place an empty container on the base and press
ZERO to zero the scale. If the scale is in motion when the ZERO button is
pressed, the DS100 will zero the scale once the scale becomes stable.
2. Place an item on the scale and wait for the MOTION indicator to go out
3. Read the weight on the display
4. Press ZERO again to weigh additional items
Net / Gross Mode
The NET annunciator to the left of the LED display will indicate the NET or
GROSS weigh status of the indicator. The indicator enters the NET mode when
the TARE button is pressed with an item on the base. Alternatively, to enter the
NET mode, press the GROSS/NET button. The NET mode is not available when
a TARE weight is not active.
To clear an active TARE weight:
If the scale is in the NET mode, enter the GROSS mode by pressing ZERO.
1.
When the scale display reads zero in the GROSS mode, press TARE.
2.
Net / Gross Weighing
1. Empty the scale base or place an empty container on the base and press
TARE
2. The indicator will read zero and place the scale in NET mode
3. Place an item on the scale platter and wait for the MOTION indicator to go out
4. Read the weight on the display
5. Press TARE again to weigh additional items
6. Press ZERO, then TARE to clear the tare weight
3