Canon imageFORMULA CR-80 설치 매뉴얼 - 페이지 13

{카테고리_이름} Canon imageFORMULA CR-80에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA CR-80 21 페이지. Check reader
Canon imageFORMULA CR-80에 대해서도 마찬가지입니다: 운영 및 유지보수 매뉴얼 (24 페이지)

페이지 인쇄

Click [Accessories], and then click [Run].

Enter "D:\SU80\setup.exe" in the [Open] fields, and then

click [OK].

Installation starts.

Follow the instructions on the screen to complete the

installation.

IMPORTANT

The computer may need to be restarted, after the installation,

depending on the operating system. If this is necessary, make

sure to restart the computer.

Connecting the Scanner to a Computer

The only way to connect the scanner to your computer is with a USB

cable.

IMPORTANT

• Be sure to use the USB cable bundled with the scanner or a Hi-

Speed USB 2.0 compatible cable with the length less than 5 m.

• When the application is running, do not turn the scanner OFF or

unplug the interface cable.

• Do not connect multiple CR-50/80 scanners to one computer.

CAUTION

• Do not turn OFF the scanner or remove the interface cable

when an application is running.

• Turn OFF the computer and the scanner before changing the

cable.

USB Connections

Connect the scanner and the computer with the cable provided or a

Hi-Speed USB 2.0 cable.

Type A Plug

USB

Connector

NOTE

Connect the type B plug (square) to the scanner and connect the

type A plug (flat) to the USB port on the computer.

Type B Plug