Canon imageFORMULA CR-80 Посібник з монтажу - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з монтажу для Сканер Canon imageFORMULA CR-80. Canon imageFORMULA CR-80 21 сторінка. Check reader
Також для Canon imageFORMULA CR-80: Посібник з експлуатації та обслуговування (24 сторінок)
Друкувати сторінку
4
Click [Accessories], and then click [Run].
5
Enter "D:\SU80\setup.exe" in the [Open] fields, and then
click [OK].
Installation starts.
6
Follow the instructions on the screen to complete the
installation.
IMPORTANT
The computer may need to be restarted, after the installation,
depending on the operating system. If this is necessary, make
sure to restart the computer.
Connecting the Scanner to a Computer
The only way to connect the scanner to your computer is with a USB
cable.
IMPORTANT
• Be sure to use the USB cable bundled with the scanner or a Hi-
Speed USB 2.0 compatible cable with the length less than 5 m.
• When the application is running, do not turn the scanner OFF or
unplug the interface cable.
• Do not connect multiple CR-50/80 scanners to one computer.
CAUTION
• Do not turn OFF the scanner or remove the interface cable
when an application is running.
• Turn OFF the computer and the scanner before changing the
cable.
USB Connections
Connect the scanner and the computer with the cable provided or a
Hi-Speed USB 2.0 cable.
Type A Plug
USB
Connector
NOTE
Connect the type B plug (square) to the scanner and connect the
type A plug (flat) to the USB port on the computer.
13
Type B Plug