Canon imageFORMULA DR-2050C 유지 관리 매뉴얼 - 페이지 21

{카테고리_이름} Canon imageFORMULA DR-2050C에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA DR-2050C 22 페이지. Canon dr-2050c; dr-2050sp document scanner
Canon imageFORMULA DR-2050C에 대해서도 마찬가지입니다: 간편한 시작 매뉴얼 (2 페이지), 브로셔 및 사양 (16 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 포켓 매뉴얼 (32 페이지), 사양 (4 페이지), 브로셔 및 사양 (16 페이지)

Symptoms The scanned image is too dark (or faint).

Problem

The [Brightness] setting is not set to an appropriate value.

Solution

If the image is dark, set a higher [Brightness] setting, or if the

image is faint, set a lower [Brightness] setting.

(See "Software Settings," on p. 49.)

Symptoms Text or images on the rear side of your document

appear in the scanned image.

Problem

The [Brightness] setting is too low, or the paper is too thin.

Solution

Set a higher [Brightness] setting. If the paper is too thin, make a

copy of the documents and then scan the copy.

Symptoms Double-sided scanning is not possible.

Problem

"Scanning Side" is set to [Simplex].

Solution

Set "Scanning Side" to [Double-sided].

Symptoms A black margin appears around the scanned document.

Problem

A document smaller than the preset paper size has been

scanned. Or, the loaded document has shifted out of

position.

Solution

Set "Paper size" to [Auto-detection]. Or, set [Border Removal] to

on.

Symptoms The scanned image is skewed.

Problem

The document has been fed at an angle. (skew)

Solution

Use the document guide adapter to prevent document skew, and

set [Deskew] to on. (See p. 22.)

Symptoms Lines, smudges, or dirt appear on the scanned image.

Problem

CauseThe scanning glass or rollers inside the scanner are

dirty.

Solution

Clean the scanning glass and rollers.

If lines still appear on the image even after cleaning the scanning

glass and rollers, the scanning glass inside the scanner may be

scratched. Contact your local authorized Canon dealer or service

representative. (See p. 59.)

Appendices