Coiltek CS-5100 Series 운영 매뉴얼 - 페이지 4

{카테고리_이름} Coiltek CS-5100 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coiltek CS-5100 Series 17 페이지. Ultrasonic sensors

Standard Configurations and Options

The CS-5100 has made since 1994. The latest version of the control (main) circuit board operates on

24VDC. This is a common industrial standard voltage source. Since our older cards operated on either

115 or 230 VAC, our standard configuration of the main board includes a small, 0.8W power supply, as

shown below. The supply accepts any AC power source between 90 and 240VAC. The supply requires

only L1 and L2. Connect incoming ground to the subpanel or enclosure.

The CS-5100, CS-5140 or CS-5103 may be ordered without the supply (-LPS) when a 24VDC source

of sufficient amperage is available.

Any of the CS-5100 series controls may be ordered with an M12 connector termination.

The layout of the CS-5100's main processor board with power supply is shown at right.