Canon imageFORMULA DR-M160II 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Canon imageFORMULA DR-M160II에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA DR-M160II 36 페이지.
C.
Installation Space Requirement
The performance of this scanner is affected by the environment in which it is
installed. Make sure that the location where the scanner is installed meets the
following environmental requirements:
Provide at least 3.94" (100 mm) of space in the front and sides of the
scanner for documents output after being scanned and for operation,
maintenance, and ventilation.
Avoid installing the machine in direct sunlight lf this is unavoidable, use
curtains to shade the scanner.
Avoid locations where a considerable amount of dust accumulates as dust
may adversely affect the inside of the scanner.
Avoid warm or humid locations, such as near a water faucet, water heater,
or humidifier.
Avoid locations where ammonia gas is emitted.
Avoid locations near volatile or flammable materials, such as alcohol or
paint thinner.
Avoid locations that are subject to vibration.
Avoid exposing the scanner to rapid changes in temperature. If the room
in which the scanner is installed is cold but rapidly heated, water droplets
(condensation) may form inside the scanner. This may result in a
noticeable degradation in scanning quality. The following conditions are
recommended for optimal scanning quality: Room temperature: 10 °C to
32.5 °C (50 °F to 90.5 °F) Humidity: 20% to 80% RH
Avoid installing the scanner near equipment that generates a magnetic
field (e.g. speakers, televisions, or radios.)
Figure 2 – Installation Space
imageFORMULA DR-M160II Service Guide
imageFORMULA DR-M160II Service Guide
June 2014
Page 8