Akw M11 DigiPump 설치 및 사용자 관리 지침 - 페이지 7
{카테고리_이름} Akw M11 DigiPump에 대한 설치 및 사용자 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw M11 DigiPump 20 페이지.
페이지 인쇄
Fixing pump to surface
1
Remove front cover
with a screwdriver.
2
Disconnect cable.
Remove pump assembly
from the back plate to
access the fixing holes.
3
Fit to a finished surface.
Do not tile up to Pump
case.
Using the back plate as a
template mark the fixing
holes. Drill and plug the
wall taking care there are
no hidden cables or pipes.
Use all the screw fixing
positions.
4
Mount the pump to the
finished surface using all
the wall fixings.
Use the Pump Spacers to
prevent the cables being
trapped.
See pump spacers
installation instructions on
page 13.
7