Akw P12 설치 매뉴얼 - 페이지 11

{카테고리_이름} Akw P12에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw P12 16 페이지. Shower waste pump

The pump unit must be located on a vertical surface with the waste water inlet/outlet connections horizontal

at the bottom of the unit.

The unit must be located away from the direct line of water jets.

Cable to and from the pump must be run directly out of zone 1 by the shortest route into the vertical surface.

Cables must be protected against mechanical damage and sealed against water ingress.

The clearance behind the unit and separation from the wall must be minimal and the gap must not be sealed.

no cable joints may be made in zone 1.

The outer cover must be correctly fitted.

Electric Shower

Mains Supply

Consumer unit

30ma RCD

5a double-pole

un-switched fused

spur

Controller and Pump

Mixer Shower

Mains Supply

Consumer unit

30ma RCD

5a double-pole

un-switched fused

spur

Controller and Pump

Order: 01905 823 299

orders.akw-ltd.co.uk

Isolating valve

filter

Isolating valves

Sensor cables

electrical Installation

electric Shower

Mixer Shower

Technical Support: 01905 560 219

flow Switch option - Showers

without pump control output

Wired connection option -

Showers with pump control

output

Wireless Pump Interface option -

compatible aKW showers only

filter

flow Switches