Akw P12 Kurulum Kılavuzu - Sayfa 11

Su Pompası Akw P12 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Akw P12 16 sayfaları. Shower waste pump

The pump unit must be located on a vertical surface with the waste water inlet/outlet connections horizontal

at the bottom of the unit.

The unit must be located away from the direct line of water jets.

Cable to and from the pump must be run directly out of zone 1 by the shortest route into the vertical surface.

Cables must be protected against mechanical damage and sealed against water ingress.

The clearance behind the unit and separation from the wall must be minimal and the gap must not be sealed.

no cable joints may be made in zone 1.

The outer cover must be correctly fitted.

Electric Shower

Mains Supply

Consumer unit

30ma RCD

5a double-pole

un-switched fused

spur

Controller and Pump

Mixer Shower

Mains Supply

Consumer unit

30ma RCD

5a double-pole

un-switched fused

spur

Controller and Pump

Order: 01905 823 299

orders.akw-ltd.co.uk

Isolating valve

filter

Isolating valves

Sensor cables

electrical Installation

electric Shower

Mixer Shower

Technical Support: 01905 560 219

flow Switch option - Showers

without pump control output

Wired connection option -

Showers with pump control

output

Wireless Pump Interface option -

compatible aKW showers only

filter

flow Switches