Canon L1 설치 절차 매뉴얼 - 페이지 34

{카테고리_이름} Canon L1에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon L1 48 페이지.
Canon L1에 대해서도 마찬가지입니다: 사용 설명서 (37 페이지)

1) Remove the punch lower front cover and the punch

rear cover (three screws), and remove the stepped

screw at the front and the rear; then, detach the

puncher unit and the host machine.

2) Open the front cover.

3) Mount the front foot cover [I] using a screw [2] (RS

tightening; M3 x 8).

4) Mount the lower front extension cover [3] using a

screw [4] (RS tightening: M3 x 8) and another

screw [5] (self-tapping; M4 x 12).

5) Close the front cover.

6) Mount the caster cover [6] using a screw [7] (RS

tightening: M3 x 8).

7) Mount the rear foot cover [8] using a screw [9]

(self-tapping; M4

12).

8) Connect the puncher unit and the host machine;

then, secure them using a stepped screw both at the

front and the rear.

9) Mount the punch lower front cover and the punch

rear cover (three screws).

10) Connect the finisher and the host machine using

an interface cable [I].