Canon L1 설치 절차 매뉴얼 - 페이지 40

{카테고리_이름} Canon L1에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon L1 48 페이지.
Canon L1에 대해서도 마찬가지입니다: 사용 설명서 (37 페이지)

2) Fit two stepped mounting screws [I] (M4 x 4) to the

pickup assembly of the finisher.

3) Route the connector cable [ l ] of the puncher unit to

the rear, and hold it as shown. Hook the hole [2] of

the joint on the two stepped mounting screws.

In the case of a Finisher-AE1, the joint would likely

interfere. Be sure to hook the puncher unit [2] in

place while keeping the upper cover [I] of the fin-

isher open.

1 1

F-1-111

4) Using a long screwdriver, secure the puncher unit

to the finisher using the two stepped screws [l] (M4

x 10).

5) Detach the rear cover of the finisher.

<Finisher-AE 1,

Remove the three screws [I], and detach the rear cov-

er [2].