Ametek Dito 빠른 시작 매뉴얼 및 안전 지침 - 페이지 12
{카테고리_이름} Ametek Dito에 대한 빠른 시작 매뉴얼 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ametek Dito 17 페이지.
페이지 인쇄
AMETEK CTS
5 16 kV models
The 16 kV models dito and NSG 435 feature lightweight simulators with battery power for compliance to IEC 61000-4-2.
5.1 Operating Elements 16 kV models
1
The discharge pistol with display
2
Exchangeable tip containing
3
Buttons for adjusting settings
4
ESD Pulse Trigger
5
Exchangeable battery
5.1.1 Quick Start 30 kV Models
1)
Charge the battery fully
2)
Setup the test area according to IEC 61000-4-2 and the test plan
3)
Ensure earth cable is connected
4)
Connect the proper Air (round) or Contact (pointed) discharge tip to the front of the discharge pistol
5)
Switch on the device
NSG 435: Press and hold the yellow button to start the simulator
Dito: Press and hold the trigger to start the simulator.
Dito: Press F2 to go to Quick Start mode
6)
Press the corresponding +/- key to set the voltage
7)
Press the corresponding discharge mode (Air or Contact)
8)
Press the trigger to fire a pulse
Quick Start and Safety Guide
1
2
1
3
4
5
V 1.0
ESD Simulators
12 / 17