Canon CN-E20-50mm T2.4 L FP 운영 매뉴얼 - 페이지 3

{카테고리_이름} Canon CN-E20-50mm T2.4 L FP에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CN-E20-50mm T2.4 L FP 3 페이지. Digital cinema lens

페이지 인쇄

GENERAL SAFETY INFORMATION

The safety warnings and cautions provided on the product or in this operation manual must be observed. Failure

to observe these warnings and cautions may result in injury or accident. Read this operation manual carefully to

familiarize yourself with its contents and ensure that you can operate the product properly.

Also, store this manual in a safe place where it can easily be referenced whenever necessary.

This operation manual uses the following symbols and terms to identify hazards in order to prevent accidents.

This indicates a potentially hazardous situation which, if not heeded, may result in death

WARNING

or serious injury to you or others. Be sure to heed all warning notices to ensure safe

operation at all times.

This indicates a potentially hazardous situation which, if not heeded, may result in a mi-

CAUTION

nor injury to you or others, or damage to property.

This indicates cautions and recommendations for operation. It contains information

NOTE

which, if not heeded, may result in this product failing to function properly. These no-

tices also contain useful information for operation.

HANDLING THE PRODUCT

WARNING

Do not stare at the sun or other bright objects through the lens. It may injure your eyes.

CAUTION

1. Ensure that all mountings are securely tightened. If a mounting becomes loose, parts may fall off and cause

injury.

2. Inspect mountings regularly (about every six months to one year) to ensure they are securely tightened. If a

mounting becomes loose, parts may fall off and cause injury.

NOTE

1. Do not expose the lens to strong impact. Striking or dropping the lens may cause the malfunction of the

product.

2. This product is not waterproof. Take measures to avoid direct contact with rain, snow, or moisture. Otherwise

it may cause the malfuction of the product.

3. Take measures to avoid sudden changes in temperature where the lens is used, which may prevent

operation temporarily if condensation forms in the lens.

DEALING WITH ABNORMALITIES

WARNING

If any of the following situations occurs, immediately dismount the lens from the camera and contact your

Canon sales representative or dealer.

• Smoke, fumes, or unusual noises

• Entry of foreign objects (such as liquid or metal objects) inside the product

MAINTENANCE AND INSPECTION

NOTE

1. Clean off any dust on the lens surface using a lens blower or a soft lens brush. In case of getting fingerprints

or stains on the lens, use a clean cotton cloth moistened with commercial lens cleaning fluid, or use lens

cleaning paper. Gently wipe in a spiral pattern from the center of the lens. Be careful not to rub dust across

the lens, which may scratch the lens surface.

2. Routine inspection about once a year is recommended, depending on the conditions and environment of use.

Request overhaul, if needed.

CAUTION

Always attach the lens cap, hood cap, dust cap or covers before storage. Storing the lens without the caps

or covers attached poses a risk of fire if the lens concentrate light in direct sunlight.

NOTE

Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry cloth. Seal the

lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside. Otherwise it may cause

the mold or the malfunction of the product.

[memo]

BT1-D002-B-ENG

STORAGE

TO THE CUSTOMER

1. Canon shall bear no responsibility for damage resulting from improper operation of this product by the

customer.

2. Canon shall make no guarantees about the product quality, functions, or operation manual and its marketability

and suitability for the customer's purpose. Moreover, Canon shall bear no responsibility for any damage, direct

or incidental, that results from usage for the customer's purpose.

3. The product specifications, configuration, and appearance are subject to change without prior notice.

4. For further information on repairs, maintenance, or adjustments not mentioned in this operation manual, contact

your Canon sales representative or dealer.

5. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without consulting

Canon or your Canon sales representative.

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

manual may be reproduced or copied in any

from or by any means without the written

permission of Canon Inc.

3/3