Canon CN20 X 50 IAS H 운영 매뉴얼 - 페이지 16

{카테고리_이름} Canon CN20 X 50 IAS H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CN20 X 50 IAS H 41 페이지. Information display
Canon CN20 X 50 IAS H에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지)

페이지 인쇄

4 MODE SETTING

4-1. OPERATION MODES

This product has an information display on which various settings can be customized. There are three

operation modes below as a setting menu. One of the operation modes can be selected according to usage

and preference.

1. Basic mode : Items that can be set and viewed are limited in this mode, and are recommended to

2. Full mode

3. Analog mode : It is the mode chosen when not using a digital function at all

This manual describes only the items that can be set on the TOP screen in each mode.

For details on how to set them, refer to

4-2. SETTINGS IN BASIC MODE

The following nine settings can be made on the Top screen in Basic Mode.

Initial Top screen in Basic Mode

Items not scrolled

[ Z.M. ]

For details on how to set them, refer to

users who do not require complex settings. This product is factory-set to basic mode.

: All items can be set and viewed in this mode.

• Switches labeled VTR, RET, IRIS A/M, and IRIS INST control the respective functions. The rocker

switch serves as a regular zoom switch.

• AUX and MEMO switches are disabled.

• To set auto iris gain adjustment, use either display or trimmer operations.

• Shuttle shot, framing preset, speed preset, and zoom tracking are not available.

Operation Manual "Information displa

IG: 50

[Adj]

Fr1P

[Trk]OFF

Shtl

A 1

[I-Tq]H

Fr1P

A 2

IG: 50

Shtl

[Trk]OFF

A 1

[I-Tq]H

Fr1P

A 2

Items displayed by scrolling

Operation Manual "Information displa

1. Go to MENU screen

2. Auto iris gain settings

3. AUX switch assignment

4. Automatic adjustment of mechanical end

5. AUX1 switch assignment

6. Zoom tracking ON/OFF

7. AUX2 switch assignment

8. Iris torque settings

9. Zoom curve mode settings

y".