Canon CN20 X 50 IAS H Bedieningshandleiding - Pagina 16
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Canon CN20 X 50 IAS H. Canon CN20 X 50 IAS H 41 pagina's. Information display
Ook voor Canon CN20 X 50 IAS H: Snelstarthandleiding (14 pagina's)
Pagina afdrukken
4 MODE SETTING
4 MODE SETTING
4-1. OPERATION MODES
This product has an information display on which various settings can be customized. There are three
operation modes below as a setting menu. One of the operation modes can be selected according to usage
and preference.
1. Basic mode : Items that can be set and viewed are limited in this mode, and are recommended to
2. Full mode
3. Analog mode : It is the mode chosen when not using a digital function at all
This manual describes only the items that can be set on the TOP screen in each mode.
For details on how to set them, refer to
4-2. SETTINGS IN BASIC MODE
The following nine settings can be made on the Top screen in Basic Mode.
Initial Top screen in Basic Mode
Items not scrolled
[ Z.M. ]
For details on how to set them, refer to
users who do not require complex settings. This product is factory-set to basic mode.
: All items can be set and viewed in this mode.
• Switches labeled VTR, RET, IRIS A/M, and IRIS INST control the respective functions. The rocker
switch serves as a regular zoom switch.
• AUX and MEMO switches are disabled.
• To set auto iris gain adjustment, use either display or trimmer operations.
• Shuttle shot, framing preset, speed preset, and zoom tracking are not available.
Operation Manual "Information displa
IG: 50
MENU
[Adj]
Fr1P
A
[Trk]OFF
Shtl
A 1
[I-Tq]H
Fr1P
A 2
IG: 50
MENU
Shtl
[Trk]OFF
A 1
[I-Tq]H
Fr1P
A 2
Items displayed by scrolling
Operation Manual "Information displa
1. Go to MENU screen
2. Auto iris gain settings
3. AUX switch assignment
4. Automatic adjustment of mechanical end
5. AUX1 switch assignment
6. Zoom tracking ON/OFF
7. AUX2 switch assignment
8. Iris torque settings
9. Zoom curve mode settings
E8
y".
y".