AIR GUARD AG-700 사용자 설명서 - 페이지 5
{카테고리_이름} AIR GUARD AG-700에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AIR GUARD AG-700 12 페이지. Antibacterial vaporizer
페이지 인쇄AG-700 Description
Switch button
Power switch
Power supply
Setup
§ Remove all packing materials from the machine. Check that all foam and plastic padding are
removed, especially around the nozzle area.
§ Fill with FLD liquid. Any other types of fluid can damage the unit. When filled, place cap back
on liquid tank.
§ Firmly attach the remote control cable to the proper input on the rear of the machine.
Operation
§ Plug power cord into a grounded electrical outlet. Turn power switch on rear of unit to "ON"
position. The machine starts to warm up and indicator light start to with orange light.
When warm-up is complete the light turn into green light , and ready to emit.
§ To emit vapor, press once and release. Do not hold down the button.
§ Once you plug in the remote control the button at the back of the machine will not function.
Use either remote control or the button at the back of the machine.
§ The remote unit's light will cycle on and off as the machine re-heats to the proper operating
temperature.
5
Fluid tank
Remote