AIR GUARD AG-700 사용자 설명서 - 페이지 6
{카테고리_이름} AIR GUARD AG-700에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AIR GUARD AG-700 12 페이지. Antibacterial vaporizer
페이지 인쇄§ For further information on operating your AG-700 Machine, see the section titled, "Remote
Control Operation".
Installation
The unit can also be operated at floor level or sitting on any regular surface.
Whatever installation method you choose, do not allow the unit to have more than a 15 degrees angle of
inclination.
Usage for treatment in a bedroom or hotel room
Place the machine next to the air conditioner intake duct and allow it to heat up. When the LED light on top
of the machine stops flashing, proceed to press the button on the remote control or back of the machine
and let the machine purge the Ultra mist. For each 10 square metres use a single 30 second purge. For larger
rooms perform multiple applications according to the floor area by 10 square metre size.
Remote Control
1.
While unit is unplugged and cool, unscrew nozzle at very front of unit and clean out debris with vinegar
and a pipe cleaner, making sure that the hole is free of clogs.
2.
Empty all fluid from machine. Add cleaning solution to tank. Plug unit in and begin warm up.
3.
Run unit in a well-ventilated area until tank is empty.
4.
Replace nozzle and refill with liquid.
Cleaning your machine regularly will help reduce costly parts replacement and repair charges.
Remote Control
§
3 meter ON/OFF wire remote controller.
Do not allow the liquid to become contaminated. Always replace the caps
on the liquid container and the machine liquid tank immediately after
filling.
After every 40 hours of continuous operation, it is recommended to run
distilled water through the system to prevent the accumulation of
particulate matter in the heating element. When cleaning, use only a
clean, lint-free cloth. An effective cleaning regimen is as follows:
6