Coldelite UF-203G 매뉴얼 - 페이지 10

{카테고리_이름} Coldelite UF-203G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coldelite UF-203G 17 페이지. Gravity soft serve freezers

2) First, remount the end piston O-rings onto the end pistons.

Simply roll onto the piston until they drop into the O-ring

notches.

5) Insert the two end pistons into the two end chambers of

the dispensing head body making certain to align the

square notch of the piston with the rectangular notch at

the front of the dispense head. Repeat this process with

center piston and center chamber.

3) Remount the center piston O-ring onto the center piston.

This O-ring and piston are easily identified as they appear

to b e two O-rings and O-ring grooves interconnected by

two vertical posts.

6) Turn the dispense head over and install the two 4" diameter

O-rings into O-ring grooves located in the back of the

head.

4) Once the O-rings have been mounted, liberally lubricate

the area between the two O-rings. Place a bead of lubricant

around the entire piston as shown.

Lightly lubricate the O-rings with the sanitary lubricant.

Spread the lubricant on the surface area between the two

O-rings and the O-rings as well. This will ensure free

movement of the dispense handles once the head is

completely assembled.