Asus A7N8X-LA (Focus) 사용자 설명서 - 페이지 12

{카테고리_이름} Asus A7N8X-LA (Focus)에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus A7N8X-LA (Focus) 18 페이지. Microatx motherboard
Asus A7N8X-LA (Focus)에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 사용자 설명서 (19 페이지)

페이지 인쇄

Connectors

This section describes and illustrates the internal connectors on the motherboard.

1. Floppy disk drive connector (34-1 pin FLOPPY1)

This connector supports the provided floppy drive ribbon cable. After

connecting one end to the motherboard, connect the other end to the floppy

drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables

with pin 5 plug).

A7N8X-LA/Explorer2

Floppy Disk Drive Connector

2. ATX power connectors (20-pin ATXPWR1)

These connectors connect to an ATX 12V power supply. The plugs from the

power supply are designed to fit these connectors in only one orientation. Find

the proper orientation and push down firmly until the connectors completely fit.

Make sure that your ATX 12V power supply can provide 8A on the +12V lead

and at least 1A on the +5-volt standby lead (+5VSB). The minimum

recommended wattage is 230W, or 300W for a fully configured system. The

system may become unstable and may experience difficulty powering up if the

power supply is inadequate.

A7N8X-LA/Explorer2

ATX Power Connector

ASUS A7N8X-LA (Explorer 2) Motherboard

FLOPPY1

NOTE: Orient the red markings on

the floppy ribbon cable to

PIN 1

ATXPWR1

+12.0VDC

+5.0VDC

+5VSB

+5.0VDC

PWR_OK

-5.0VDC

COM

+5.0VDC

COM

+5.0VDC

PS_ON#

COM

+3.3VDC

-12.0VDC

+3.3VDC

PIN 1