DOREMIDI FC-3 사용 설명서 - 페이지 6

{카테고리_이름} DOREMIDI FC-3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOREMIDI FC-3 8 페이지. Midi foot controller

MODE

Single

Each time the pedal is pressed and released, the value of DATA1/DATA2 is sent only once.

Each time the pedal is pressed and released, the values of the DATA1/DATA2 Range are

Toggle

sent alternately.

Press the pedal to send the value of the first data frame of DATA1/DATA2, release the

Reset

value of the second data frame of DATA1/DATA2.

Each time the pedal is pressed and released, the value will increment in the DATA1/DATA2

Increase

Range.

Each time the pedal is pressed and released, the value will decrease in the DATA1/DATA2

Decrease

Range.

Set: After Set the parameters, click "Set" to set the FC-3.

m. Save File: Save the current pedal configuration content.

Open File: Load the configuration content of the pedal.

Pedal MIDI Data: MIDI message display box, after triggering the pedal, the pedal's

MIDI message will be displayed in the display box. STATUS are displayed in

hexadecimal notation, and CHAN, DATA1, DATA2 is displayed in decimal notation.

Example of pedal setting

 Set the single switch type pedal

Set the No. 2 pedal as sustain pedal, channel 1, the CC controller is 64, and the CC

controller value is 127, MODE = Reset, as shown in the figure:

Description