DAESAN DHL-H3 사용자 설명서 - 페이지 5
{카테고리_이름} DAESAN DHL-H3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAESAN DHL-H3 12 페이지. Led hydroponics
DAESAN DHL-H3에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)
페이지 인쇄How to Use Nutrient Tank
How to Fill Water
in the Nutrient Tank
How to Dilute
Hydroponic Fertilizer A & B
with Water
[LIGHT]
- OFF : Turn off LED lamps
LED
- 10 :
Lamp
- 12 :
Auto
- ON : Turn on LED lamps
Control
Outside
Outside
Temperature
Temperature
Display Function
Display
☞ Displays 10 to 30 °C
[PUMP]
- OFF : Stop circulating nutrient solution
Water
- 10 : Circulating nutrient solution for 10 min.(supply 10min/hour)
Auto
- 30 : Circulating nutrient solution for 30 min.(supply 30min/hour)
Control
- ON : Circulate nutrient solution continuously
1. Select the proper place to install and complete installation.
2. Fix water pump at the bottom of inside of nutrient tank.
3. Fill water in the tank up to its max. 12ℓ, and turn on
the electric power.
4. Set "10" in
the waterways and check if there is any leakage or not.
5. If not, dilute hydroponic fertilizer with water in the nutrient tank.
1. Fill each bottle for hydroponic fertilizer A & B with
200㎖ of warm water respectively and dilute them.
2. Use a syringe enclosed to fill up each 12㎖ of A & B.
3. Add them and 12ℓ of water in nutrient tank.
4. And dilute again.
Lighting for 10 hours (10 hours on and 14 hours off)
Lighting for 12 hours (12 hours on and 12 hours off)
[PUMP]
function, make water go through
5
Alarm Function
☞ Warning sound and lamp
for the shortage of
nutrient solution