DAESAN DHL-H3 사용자 설명서 - 페이지 6

{카테고리_이름} DAESAN DHL-H3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAESAN DHL-H3 12 페이지. Led hydroponics
DAESAN DHL-H3에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

How to Clean Hydroponic System

1. Firstly, remove all pots from the hydroponic system, disconnect power cables (input and output) connected with

the nutrient tank shown as below, and separate the pump cord and pump hose from the body in the same way.

Connected

2. Take off the cover from each waterway and push water remained in the waterways toward water flow direction

by using a towel. This work should be done from top to bottom gradually and send water into the nutrient tank.

3. After gathering water into the nutrient tank from the waterway, separate the drain hose as shown below picture,

and discard all water in the tank (empty the tank). Then, clean the tank.

4. After completing clean work for the waterways and the tank, fill water in the tank.

Connect the electric power and the pump hose which disconnected for cleaning to the pump.

5. Return all pots back, power on the nutrient tank, and continue to cultivate plants.

6. If the water pump gathers the foreign matter or moss, clean it with water.

(At this time, be sure to unplug the electric power plug so that water does not get into the electric parts such as

control panels and switches.)

7. Each waterway loading pots should be cleaned in the same way as when crops are replaced with new seedlings.

Drainage Connected

Power Disconnected

Drainage Disconnected

Hose Separated