DAESAN DHL-H3 Kullanıcı Kılavuzu - Sayfa 6
Sera Kiti DAESAN DHL-H3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAESAN DHL-H3 12 sayfaları. Led hydroponics
Ayrıca DAESAN DHL-H3 için: Kullanıcı Kılavuzu (12 sayfalar)
Sayfayı YazdırHow to Clean Hydroponic System
1. Firstly, remove all pots from the hydroponic system, disconnect power cables (input and output) connected with
the nutrient tank shown as below, and separate the pump cord and pump hose from the body in the same way.
Connected
2. Take off the cover from each waterway and push water remained in the waterways toward water flow direction
by using a towel. This work should be done from top to bottom gradually and send water into the nutrient tank.
3. After gathering water into the nutrient tank from the waterway, separate the drain hose as shown below picture,
and discard all water in the tank (empty the tank). Then, clean the tank.
4. After completing clean work for the waterways and the tank, fill water in the tank.
Connect the electric power and the pump hose which disconnected for cleaning to the pump.
5. Return all pots back, power on the nutrient tank, and continue to cultivate plants.
6. If the water pump gathers the foreign matter or moss, clean it with water.
(At this time, be sure to unplug the electric power plug so that water does not get into the electric parts such as
control panels and switches.)
7. Each waterway loading pots should be cleaned in the same way as when crops are replaced with new seedlings.
Drainage Connected
Power Disconnected
Drainage Disconnected
6
Hose Separated