Asus AT5NM10T-I NA 사용자 설명서 - 페이지 21

{카테고리_이름} Asus AT5NM10T-I NA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AT5NM10T-I NA 42 페이지. User manual
Asus AT5NM10T-I NA에 대해서도 마찬가지입니다: 사용자 설명서 (43 페이지)

페이지 인쇄

Serial ATA connectors (7-pin SATA_1, SATA_2, SATA_E1, SATA_E2)

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via

Serial ATA 3.0 Gb/s signal cables.

AT5NM10T-I SATA 3.0Gb/s connectors

• Install the Windows

• The SATA3G_E1/E2 (black) connectors are for data drives only. ATAPI device is not

supported.

USB connector (10-1 pin USB78)

This connector is for a USB 2.0 port. Connect the USB module cable to this connector,

then install the module to a slot opening at the back of the system chassis. This USB

connector complys with USB 2.0 specification that supports up to 480 Mbps connection

speed.

AT5NM10T-I USB2.0 connector

Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!

The USB module cable is purchased separately.

1-11

SATA3G_E2

SATA3G_2

SATA3G_E1

SATA3G_1

XP Service Pack 3 or later version before using Serial ATA.

USB78

PIN 1

Chapter 1: Product introduction