DORIC DS2079 설치 지침 - 페이지 2

{카테고리_이름} DORIC DS2079에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DORIC DS2079 2 페이지. Multi point

Extrusion Cut Outs

Assembling top and bottom locks to rods

ABOVE THE CENTRE LINE

1. Preasemble and connect

the top and bottom operating

rods to the Actuator bar.

BELOW THE CENTRE LINE

www.doric.com.au

2. Feed the top and bottom operating

rods fitted with the actuating bar through

the the top cut. Do not fully

insert slave locks into cutouts.

3. With the top slave unit in the locked

position, attach the top rod.

4. Find and pull the bottom out through the

bottom cutout.

Fitting Centre lock

5.Fully insert centre lock into cut out.

Secure centre lock with two 12mm

countresink self tapping screws supplied.

6. Fully insert the slave locks and secure

with 12mm countersink self tapping

screws.