DORIC DS2500 설치 매뉴얼 - 페이지 3

{카테고리_이름} DORIC DS2500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DORIC DS2500 6 페이지. Flush mount mortice sliding door lock

INSTALLATION GUIDE

STEP 1: SET LOCKBODY

The Fork at the rear of the lockbody should be

oriented so that it is closest to the internal side of

the door (i.e. toward the snibbed furniture side).

If the fork is in the incorrect orientation for your

door application:

Remove the M3 ﬁxing screw,

Rotate the fork 180 degrees,

and re-tighten ﬁxing screw.

DS2500 I

ﬁxing

Fork

screw

Rotate

180°

FLUSH MOUNT MORTICE

SLIDING DOOR LOCK

STEP 2: SET FURNITURE

LOCK CONFIGURATION

Depending on your selected conﬁguration

you will need to place the furniture in

either the locked or unlocked position.

Double/Single Cylinder

Conﬁguration

Cylinder on Internal & External

or,

Cylinder on Internal

Furniture needs to be placed in

the locked position as indicated

by the arrows aligning.

No Cylinder Conﬁguration

Latching only, no cylinders

Furniture needs to be placed

in the unlocked position as

indicated by the arrows

being misaligned.

Head office:

Ph: 1300 132 389

38 Redfern St

Fax: 1300 652 292

Wetherill Park NSW 2164

Australia