DORIC DS2500 설치 매뉴얼 - 페이지 5
{카테고리_이름} DORIC DS2500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DORIC DS2500 6 페이지. Flush mount mortice sliding door lock
페이지 인쇄
INSTALLATION GUIDE
STEP 5: FITTING THE
LOCKBODY
5a. Ensure the furniture and
the lockbody are in the
unlocked position:
The sliding snib is in the
bottom position (A)
The lockbody tongues are in
the retracted position (B)
5b. Then insert the lockbody
into the extrusion.
5c. Fix with the 2x 10G screws.
DS2500 I
FLUSH MOUNT MORTICE
SLIDING DOOR LOCK
DN1291 FLUSH KEEPER
INSTALLATION:
1. Mill the jamb using the cutout details provided
2. Fit keeper in using the 2 x screws
3. Adjust the keeper position through the use of
packers, and/or the adjustment screws.
4. Close the door and test the operation.
A
Packer
For horizontal
adjustment
Horizontal
B
Adjustment Screws
Fine tune horizontal
adjustment
Vertical
C
Adjustment Screws
Fixing slots allow
for adjustment
Head office:
38 Redfern St
Wetherill Park NSW 2164
Australia
A
C
B
B
C
Ph: 1300 132 389
Fax: 1300 652 292
www.doric.com.au
4