bolid S2000-SP1 ORION ISS 설치 매뉴얼

{카테고리_이름} bolid S2000-SP1 ORION ISS에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. bolid S2000-SP1 ORION ISS 8 페이지. Executive relay module
bolid S2000-SP1 ORION ISS에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지)

페이지 인쇄

This Installation Manual includes instructions on how to mount the S2000-SP1 Executive Relay

Module (hereinafter referred to as the module) and to prepare it for operation.

The description of the module and rules of setting up and operating this one can be found in

S2000-SP1 Instruction Manual (which is a part of the standard delivery and can also be

downloaded from the website of the Bolid Company at the address of www.bolid.com, in the

Products Section).

1 SAFETY PRECAUTIONS

- There are no potential hazard circuits within the module.

- Do SHUT OFF the device power before mounting, wiring, or maintaining the

module.

- Mounting and maintaining the module MUST be performed by qualified engineers.

2 MOUNTING THE MODULE

2.1 The module is to be mounted within cabinets, on walls, or on other constructions within

premises closely to connected executive devices at places protected against atmospheric

fallouts, mechanical damage, and unauthorized access.

2.2 Wiring the module is performed in accordance with Figure 4.

www.bolid.com

EXECUTIVE RELAY MODULE

S2000-SP1 ver.1.56 INSTALLATION MANUAL rev.0

S2000-SP1

INSTALLATION MANUAL

ORION ISS