Canon LV-5200 소유자 매뉴얼 - 페이지 32

{카테고리_이름} Canon LV-5200에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5200 48 페이지. Canon lv-5200: user guide
Canon LV-5200에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)

페이지 인쇄

1. Connecting to Computer

VIDEO INPUT

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to move the red

frame pointer to the AV SYSTEM Menu icon.

Press the POINT DOWN button to move the red arrow pointer to

the system that you want to select and then press the SET

button.

VIDEO/Y JACK OR S-VIDEO JACK

Auto

The projector automatically detects the incoming video system, and

adjusts itself to optimize its performance.

When the video system is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce a proper video image, it is necessary

to select a specific broadcast signal format among PAL, SECAM,

NTSC, NTSC 4.43, PAL-M, and PAL-N.

VIDEO/Y, Pb/Cb, Pr/Cr JACKS

Auto

The projector automatically detects the incoming video signal, and

adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce a proper video image, it is necessary

to select a specific component video signal format among 480i, 575i,

480p, 575p, 720p, 1035i and 1080i.

SELECTING THE VIDEO SYSTEM

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates the system

being selected.

Move the pointer to the

system and press the

SET button.

AV SYSTEM MENU (COMPONENT VIDEO)