Canon LV-5210 사양 - 페이지 9
{카테고리_이름} Canon LV-5210에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon LV-5210 22 페이지. Mounting hanger for low ceilings
Canon LV-5210에 대해서도 마찬가지입니다: 사양 (47 페이지), 브로셔 및 사양 (2 페이지), (일본어) 조립 및 설치 매뉴얼 (8 페이지)
페이지 인쇄
Basic Serial Functional Specification for LV-5210/7215/7210
6.4 Operation Requirements
When the projector's status in this below, functional execution commands are limited.
Projector Status
Standby Mode
Processing Countdown
Processing Cooling Down
Abnormal Temperature Status
Processing Mode Change
Processing Power Save・Cooling
Down
Processing Power Save
Note) When the status is above, even if the projector receives other command in the above
status, the projector returns [ACK] [CR].
6.5 POWER ON COMMAND
COMMAND
"C00" [CR]
Note) When the status is above, even if the projector receives other command
Detail
in the above status, the projector returns [ACK] [CR].
Acceptable
Response
Unacceptable
6.6 POWER OFF COMMAND (QUICK Power OFF)
COMMAND
"C01" [CR]
Power OFF(Stand By)
When Power OFF with ON-OFF button of the projector or the remote
Detail
control, "Power OFF" will be displayed. However, as soon as this command
is sent, Quick Power OFF is executed.
Acceptable
Response
Unacceptable
6.7 POWER OFF COMMAND
COMMAND
"C02" [CR]
Power OFF(Stand By)
When Power OFF with ON-OFF button of the projector or the remote
Detail
control, "Power OFF" will be displayed. However, as soon as this command
is sent, Power OFF is executed.
Acceptable
Response
Unacceptable
Available Functional Execution Commands
C00:POWER ON Only
C00:POWER ON→Terminate processing Countdown
C01:POWER OFF
C02:POWER OFF→Terminate processing Countdown
NONE(does not execute even if receiving a command)
NONE(does not execute even if receiving a command)
NONE(does not execute even if receiving a command)
NONE(does not execute even if receiving a command)
C00:POWER ON
C01:POWER OFF
Other Commands: POWER ON
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page
9